Jiofi.local.html to Login or via 192.168.1.1 Jio or 192.168.l.l or 192.168.1.254 Jio to Change JioFi Mifi Wifi Password Change, Battery Percentage level Status, Jiofi Router Reset, Jiofi Firmware upgrade or Update signin, Jiofi Internet Speed Increase …..
JioFi is a portable broadband device which allows the internet connectivity to multiple devices for multiple users. Reliance Digital and Reliance LYF collaborated to manufacture JioFi. The JioFi device creates a short ranged personal WiFi hotspot for devices to access the internet connectivity. A JioFi device can connect to 10 devices simultaneously along with an extra USB connection. Precisely, It is a miniature form of a WiFi router which is portable. Configure this wifi hotspot router will be possible only by login into jiofi.local.html or 192.168.1.1.
- 1 How to Configure Jiofi by signing into jiofi.local.html or 192.168.1.1 or 192.168.l.l
- 2 JioFI.Local.Html and 192.168.1.1
- 3 Jiofi Mifi Password Change and how to login into jiofi.local.html or 192.168.1.1
- 4 How to Change Jiofi Broadcasting SSID in jiofi.local.html
- 5 How to Check Jiofi Battery Percentage in jiofi.local.html?
- 6 192.168.l.l or 192.168.1.l
- 7 How to login into 192.168.1.1
- 8 How to Access the sdcard slot (Storage Slot) by login 192.168.l.l
- 9 Procedure for How to update Jiofi Firmware Update?
- 10 How to Increase Jiofi Internet Speed (Tips)?
- 11 How to Reset Jiofi router?
- 12 How to make video calls or voice calls using Jiofi device
How to Configure Jiofi by signing into jiofi.local.html or 192.168.1.1 or 192.168.l.l
Actually now Jiofi Dongle is a dead cheap 4G modem compared to other branded dongles or modems. And also Jiofi Setup is very easy to login into jio.local.html URL. JioFi.Local.Html is the official URL or login address of JioFi Router. Similarly, 192.168.1.1 or 192.168.l.l or 192.168.l.1 is the IP address of JioFi router to access the login page. JioFi Dongle configuration needs access to router’s admin page. The URL JioFi.Local.Html or IP address 192.168.1.l must be entered in browser’s address bar to access the admin page. Once your Jio Sim is activated, Just follow the below steps:
JioFI.Local.Html and 192.168.1.1
JioFI.Local.Html is the default address URL for the admin page. Any authenticated user can enter the administrator dashboard which is managed to configure JioFi Dongle. The IP address 192.168.1.1 is the common IP address for many wireless, and wired routers. It is an alternate for JioFI.Local.Html to access the admin page. A user can follow these steps to configure Jiofi Dongle…..
- Enter the URL or the IP address in the browser’s search box
- When the Admin page is successfully loaded, a window pops up asking to enter username and password. Enter the correct credentials for authentication
- Click on the Login button to verify entered username and password
Jiofi Mifi Password Change and how to login into jiofi.local.html or 192.168.1.1
The trend to add a funky WiFi name to your local network is a must. A user can change Jiofi Username and Jiofi Password in JioFi Device by following these steps….
- Go to the wireless setting panel in your device settings, turn on the WIFI.
- Make sure to check jiofi paper box for default SSID and Password.
- Open your web browser and Go to the link http://jiofi.local.html/ or 192.168.1.1 or 192.168.l.l.
- You’re now landed on to the control panel, where you can perform various tasks without entering the admin panel.
- Next, Login with your User ID as “administrator” and Password as “administrator” for entering the admin panel.
- After logging into Jiofi router, you’re all set to modify the default settings under the ‘JIOFI Web Configuration Panel’.
- You can Changing Jiofi 2 Mifi settings. Click on Settings button. In the left side of your PC it shows Wifi tab. Click on it.
- Choose or Write the Unique Broadcasting SSID as your wish, Password or Security Key (Wi-Fi password) and change the channel mode.
- After change those details finally you can Click on Apply button.
How to Change Jiofi Broadcasting SSID in jiofi.local.html
The Service Set Identifier (SSID) gives an idea to the user about different networks and their strengths. It shows how powerful or strong a network’s signal is for the public access. The JioFi router broadcasts SSID signals periodically along with a channel to access it. SSIDs are not necessary for wireless routers but it is transmitted.
Many techies think broadcasting SSID is necessary for an operating system like Windows 10 which offers great Wi-Fi networking and can hold the connection for a while.
The older version of operating systems or phones connects through USB Wi-Fi adapters which are not secure and safe. The Windows XP, Windows 7, and earlier versions of Android operating systems had the same problem. It is necessary to use a wireless USB Dongle to establish a smooth connection between JioFi and devices. Any user change broadcasting using these steps….
- Log into the admin page through jiofi.local.html
- Click on the JioFi setting tab
- Click on the WiFi Menu
- Under the WIFI settings, Default SSID name will be displayed
- Change the SSID by rebooting it and set a unique name
How to Check Jiofi Battery Percentage in jiofi.local.html?
JioFi is an electronic device which needs to be charged. The administrator page of the device has a provision to check the battery status. Follow these simple steps to check JioFi battery percentage
- Log into the static page of the device through http://jiofi.local.html or http://192.168.1.1/ or http://192.168.l.l/ using administrator as username and password
- Go to the JioFi setting and click on WiFi menu
- Check WiFi security set to WPA-PSK/WPA2-PSK, and Wireless encryption type is set to AES. AES is a security algorithm used to safeguard the website
- The battery percentage can be viewed by accessing the Battery Capacity space
192.168.l.l or 192.168.1.l
A common mistake committed by many users is the identification of correct IP address. The IP address 192.168.1.1 is misunderstood as 192.168.I.I. The page does not load when IP address has I (capital i) or l (small L). The IP address always consists of numbers from 0 to 256.
How to login into 192.168.1.1
This is done into five simple steps as follows:
- The first step is to enter the 192.168.1.1 into your browsers address number.
- In case you experience trouble or get errors when you key in the number, then 19216811 is not your routers IP address.
- Once you confirm your routers IP address, you feed it into your browsers URL address. This will direct you to the user login panel and you will be required to feed in your router user and the password.
- In case you happen to forget the username and the password, there is a way to retrieve and recover your password back.
- The moment you access the admin panel, you will be able to change and modify all the internet settings.
How to Access the sdcard slot (Storage Slot) by login 192.168.l.l
Now Jio announced a latest offer on Recharges. Anybody recharge on this time 1.5GB Data per day. Its cost is Rs.399/- only upto 82days. Hurry. Lot of Jiofi users may scared because how to use the memory card slot and How to accessing the SD card slot in Jiofi Mifi Router. Just Follow the instructions…
- First every user must insert the sdcard / memory card in Jio Dongle 2 device
- Here you must enable the storage account and set the username and password.
- You can access the SD card information to all connected devices of your Jiofi
- Now access the files by entering into the URL http://jiofi.local.html/sdcard.html or jiofi.local.html
- Click the Wifi Disk button. use the sdcard username and password.
- Now it can access the Storage Slot. Then You can upload your files and you can copy the pics or files in your PC / Laptop
Procedure for How to update Jiofi Firmware Update?
When new JioFi firmware is available, it gets updated automatically. If you need to reflash it, visit a Reliable Jio Service Centre and request them for a reflash. They will open the Admin panel and reflash your JioFi.
Jiofi has become so famous in India because it allows them have access to fast, free and unlimited data. This is mostly because; India’s mobile data is still pretty expensive. For that reason, JioFi is the best option for anyone in need of fast, unlimited and affordable data.
Here are the following steps to JioFi Firmware upgrade…
- Every Jiofi user must Power on the JioFi device and connect it to a Personal Computer (PC).
- Then Login to admin panel via jiofi.local.html or 192.168.1.1
- Select JioFi settings tab and then select Jiofi firmware Upgrade menu
- Check the installed firmware version under Device Software Version
- Select Browse option under Software upgrades to access the available JioFi firmware. If any JioFi upgrade firmware is available, then select it
- Click or tap on Apply button to start firmware upgrade. The upgrading process can take a while.
- Hard reset the JioFi to restore all the factory settings.
- Now try to connecting PC or mobile to Jiofi WiFi network
How to Increase Jiofi Internet Speed (Tips)?
JioFi internet speed gets slow after a while because of device’s configuration. The reasons behind slow internet are
Daily data usage limit exhausted
JioFi has a limited data usage throughout the day. If a user exhaust daily Jio 4G data, then automatically internet speed will be slowed
Weak network signals
The networking towers must be another factor for slow internet. The signal strength can easily be determined by the JioFi device. If the light is green, then JioFi has a strong signal but if the light is red, then it has the weak network signal.
More connected devices
It is recommended to connect 10 more devices with USB connectivity also at once but this can slow down the internet speed. Here are some Tips to Increase the JioFi internet speed
- Place the JioFi device within a 10-meter radius of the connected device. It must be kept in an open area without any obstructions.
- JioFi network indicator must be checked regularly to get the maximum internet speed possible.
- JioFi must be connected to 2 devices at once to enhance the internet speed.
- If the daily plan is exhausted, it is always recommended to recharge and renew the plan.
- Delete applications cached memory regularly.
How to Reset Jiofi router?
JioFi encourages personal hotspot for electronics capable of networking such as mobile phones, desktops, laptops or any other device. Many users customize JioFi default settings for their personal use but sometimes, it could backfire on the user itself. If all the important JioFi settings are lost, the local connection will be jeopardized. If you want to Restore Jiofi default Settings. But the best feature of the JioFi device is Jiofi router reset which can be set through these steps.
- Initially, turn on the Jiofi router
- Open the back panel of the router
- Search for the Jiofi Router Reset button or WPS button on the left of the Dongle
- Press the button for nearly 30 seconds with a pencil or a needle
- A light starts blinking on the JioFi dongle which indicates automatic JioFi router reset.
- Launch any internet browser to access the jiofi.local.html page
- The same configuration will be displayed on the PC.
How to make video calls or voice calls using Jiofi device
For making Jiofi video calls or voice calls with the help of jiofi router device, you just have to download Jio4gvoice app in your phone(no matter your device is 4g volte or not).
Then connect your jiofi network with your device. After entering the jiofi network, you will be able to assess the awesome feature of calling in your phone devices. You can call to anyone at anytime but only national calls are allowed in the prescribed plans of jio. If you want to do any international call then you have to buy the plans of international call packs which starts from Rs1100 and in this offer you will get Rs999 balance in your jio account.
- With the JIO JOIN APP or Jio4GVoice App, it has made easy to make HD video calls or voice calls over the JIOFI WIFI.
- In order to make calls, first, connect to the JIOFI network on your Android device.
- Download and install Jio Join app from Google play store.
- Open the jio join app and grant all the permissions the app asks for.
- On the home screen of the app, an option appears saying ‘Configure JioJoin using Jio Sim number in the JioFi: ___’
- The app auto connects itself to the network and Sim after few moments. Fulfil the OTP requests.
- After this configuration of JioJoin app, you’re all set to place video or voice calls to anyone.
By mistake you not remember the login details here is another option for you changed the login details. Simple click the reset button for about 30 seconds by powering on the device. The Reset button will be available in the backside of your device.